Molecularly imprinted polypyrrole film-coated poly(3,4-ethylenedioxythiophene):polystyrene sulfonate-functionalized black phosphorene for the selective and robust detection of norfloxacin was written by Li, Guangli;Wu, Jingtao;Qi, Xiaoman;Wan, Xuan;Liu, Ying;Chen, Yuwei;Xu, Lijian. And the article was included in Materials Today Chemistry in 2022.Computed Properties of C16H18FN3O3 The following contents are mentioned in the article:
An efficient molecularly imprinted polymer (MIP) voltammetric sensor was prepared based on polypyrrole (PPy) imprinted film-bearing poly(3,4-ethylenedioxythiophene):polystyrene sulfonate-functionalized black phosphorene (BP-PEDOT:PSS) for the selective recognition and robust determination of norfloxacin. BP-PEDOT:PSS was prepared via a simple ultrasonic-assisted liquid-phase exfoliation as an efficient support for use in MIP electrochem. sensors. The imprinted PPy film was deposited onto the surface of BP-PEDOT:PSS via the potentiodynamic technique in the presence of norfloxacin, with the imprinting factor of 3.86 for norfloxacin. The morphologies and microstructures of the sensing materials were investigated using SEM, energy dispersive X-ray spectroscopy, transmission electron microscopy, and Raman spectroscopy. Addnl., parameters including the BP-PEDOT:PSS loading volume, norfloxacin:pyrrole molar ratio, electropolymerization cycles, template removal, solution pH, and time of electrode exposure to the analyte were optimized. Under optimal conditions, the response peak currents of norfloxacin correlated linearly to norfloxacin concentrations from 0.001 to 10μM, with a limit of detection of 0.25 nM. The prepared imprinted sensor could effectively distinguish norfloxacin from other fluoroquinolone antibiotics with the selectivity coefficients of 5.4-17.3 and maintained stable, robust voltammetric responses for up to two weeks. Moreover, it successfully detected norfloxacin in pharmaceutical formulations and milk samples. This study involved multiple reactions and reactants, such as 1-Ethyl-6-fluoro-4-oxo-7-(piperazin-1-yl)-1,4-dihydroquinoline-3-carboxylic acid (cas: 70458-96-7Computed Properties of C16H18FN3O3).
1-Ethyl-6-fluoro-4-oxo-7-(piperazin-1-yl)-1,4-dihydroquinoline-3-carboxylic acid (cas: 70458-96-7) belongs to piperazine derivatives. Piperazine causes primary dermal irritation and skin burns at high concentrations. Piperazine also causes eye irritation in humans. Piperazine and its salts did not induce point mutations in a bacterial test. A series of mutagenicity studies in cells, both in vitro and in vivo, has been completed and showed no evidence of mutagenic effect.Computed Properties of C16H18FN3O3
Referemce:
Piperazine – Wikipedia,
Piperazines – an overview | ScienceDirect Topics