Category: 13349-91-2

13349-91-2, 1-(2,2,2-Trifluoroethyl)piperazine dihydrochloride is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

In a 5 mL glass microwave vial equipped with a magnetic stirring bar and nitrogen flow at room temperature was placed methyl 4-bromo-1-(4-bromo-5-(isopropylthio)thiazol-2- yl)-3-methyl-1 H-pyrazole-5-carboxylate prepared as described above with respect to Compound 1 (300 mg, 0.659 mmol), 1-(2,2,2-trifluoroethyl)piperazine hydrochloride (135 mg, 0.659 mmol), XantPhos (38.1 mg, 0.066 mmol) and Cs2C03(1.07 g, 3.30 mmol),nitrogen and vacuum cycles were performed (2x). Nitrogen gas was bubbled through dioxane (3 mL), which was then added to the microwave vial, followed by the addition of the catalyst RuPhos Palladacycle (53.8 mg, 0.066 mmol). The vial was capped and placed in an oil bath at 105 C for 16 h. The solvent was evaporated under vacuum and the crude product was purified by flash chromatography on silica gel (dry packing) using a solution of EtOAc in hexanes (10 to 30% gradient), affording the title compound (123 mg, 0.227 mmol, 34%) as yellow oil., 13349-91-2

The synthetic route of 13349-91-2 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; BANTAM PHARMACEUTICAL, LLC; SIDDIQUI, Arshad, M.; CIBLAT, Stephane; DERY, Martin; CONSTANTINEUA-FORGET, Lea; GRAND-MAITRE, Chantal; BRUNEAU-LATOUR, Nicolas; SHIPPS, Gerald, W.; COOPER, Alan, B.; OZA, Vibha; KOSTURA, Matthew, W.; LUTHER, Michael; LEVINE, Jedd; (174 pag.)WO2018/102453; (2018); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.13349-91-2,1-(2,2,2-Trifluoroethyl)piperazine dihydrochloride,as a common compound, the synthetic route is as follows.

EXAMPLE 70 N-[2-((R)-Indan-1-ylamino)-4H-benzo[d][1,3]oxazin-6-yl]-2-[4-(2,2,2-trifluoro-ethyl)-piperazin-1-yl]-acetamide Prepared from 2-chloro-N-[2-((R)-indan-1-ylamino)-4H-benzo[d][1,3]oxazin-6-yl]-acetamide (Example 3 step A) (100 mg, 0.281 mmol) and commercially available 1-(2,2,2-trifluorethyl)piperazine hydrochloride (CAS 13349-91-2) (87 mg, 0.422 mmol) in acetonitrile (1 ml) with diisopropylethyl amine (0.24 ml, 1.405 mmol) according to the procedure described for Example 3 step B. Obtained the title compound as a white foam (105 mg, 77%), MS (ISP) m/e=488.3 [(M+H)+].

13349-91-2, As the paragraph descriping shows that 13349-91-2 is playing an increasingly important role.

Reference：
Patent; Kolczewski, Sabine; Roche, Olivier; Steward, Lucinda; Wichmann, Juergen; Woltering, Thomas; US2010/63037; (2010); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.13349-91-2,1-(2,2,2-Trifluoroethyl)piperazine dihydrochloride,as a common compound, the synthetic route is as follows.

EXAMPLE 70 N-[2-((R)-Indan-1-ylamino)-4H-benzo[d][1,3]oxazin-6-yl]-2-[4-(2,2,2-trifluoro-ethyl)-piperazin-1-yl]-acetamide Prepared from 2-chloro-N-[2-((R)-indan-1-ylamino)-4H-benzo[d][1,3]oxazin-6-yl]-acetamide (Example 3 step A) (100 mg, 0.281 mmol) and commercially available 1-(2,2,2-trifluorethyl)piperazine hydrochloride (CAS 13349-91-2) (87 mg, 0.422 mmol) in acetonitrile (1 ml) with diisopropylethyl amine (0.24 ml, 1.405 mmol) according to the procedure described for Example 3 step B. Obtained the title compound as a white foam (105 mg, 77%), MS (ISP) m/e=488.3 [(M+H)+].

13349-91-2, As the paragraph descriping shows that 13349-91-2 is playing an increasingly important role.

Reference：
Patent; Kolczewski, Sabine; Roche, Olivier; Steward, Lucinda; Wichmann, Juergen; Woltering, Thomas; US2010/63037; (2010); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.13349-91-2,1-(2,2,2-Trifluoroethyl)piperazine dihydrochloride,as a common compound, the synthetic route is as follows.

13349-91-2, The material so obtained was suspended in methylene chloride and a saturated methanolic ammonia solution (20 ml) was added. The resultant mixture was stirred at ambient temperature for 20 minutes. The mixture was filtered and the filtrate was evaporated at ambient temperature under vacuum. There was thus obtained 1- (2, 2, 2-TRIFLUOROETHYL) piperazine which was used without any additional purification

13349-91-2 1-(2,2,2-Trifluoroethyl)piperazine dihydrochloride 16312067, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2004/41829; (2004); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.13349-91-2,1-(2,2,2-Trifluoroethyl)piperazine dihydrochloride,as a common compound, the synthetic route is as follows.

General procedure: To a stirred suspension of 5-chloro-2-[[5-methyl-3-(6-methyl-3-pyridyl)isoxazol-4- yl]methyl]pyridazin-3-one (building block A, 300 mg, 0.947 mmol) and (R)-3- hydroxypyrrolidine (0.14 mL, 1.73 mmol) in DMSO (0.5 mL) and acetonitrile (3 mL) was added potassium carbonate (393 mg, 2.84 mmol) Then the reaction mixture was stirred at 70 C for 18 h. After cooling to room temperature the reaction mixture was diluted with EtOAc (80 mL) was washed three times with water (10 mL) and brine (10 mL). The aqueous layers were back extracted twice with EtOAc (80 mL). The combined organic extracts were dried (Na2S04), filtered and concentrated in vacuo. Purification by flash chromatography (silica, gradient: 0% to 10% MeOH in CH2CI2) afforded the title compound (341 mg, 93 %) as an off-white foam. MS (ESI): 368.2 ([M+H]+).

13349-91-2, 13349-91-2 1-(2,2,2-Trifluoroethyl)piperazine dihydrochloride 16312067, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CECERE, Giuseppe; GROEBKE ZBINDEN, Katrin; HERNANDEZ, Maria-Clemencia; KNUST, Henner; KOBLET, Andreas; OLIVARES MORALES, Andres Miguel; PATINY-ADAM, Angelique; PINARD, Emmanuel; RUNTZ-SCHMITT, Valerie; STEINER, Sandra; (328 pag.)WO2019/238633; (2019); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics