Category: 5308-25-8

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5308-25-8,1-Ethylpiperazine,as a common compound, the synthetic route is as follows.

5308-25-8, A mixture of 7-chloro-1-cyclopropyl-6-fluoro-4-oxo-1,4-dihydroquinoline-3-carboxylic acid 1a (1 mmol) and Nethylpiperazine2y (1.5 mmol) and n-FZSA (0.06 g) as catalystin H2O (5 ml) were heated under reflux for the appropriatetime. The reaction was monitored by TLC. After appropriatetime, the catalyst was separated using an externalmagnet and washed with hot ethanol (5 mL). The reactionmixture was then cooled to room temperature. The precipitatedsolid was collected by filtration, and recrystallized fromethanol 96% to give desired compound in high yields.

As the paragraph descriping shows that 5308-25-8 is playing an increasingly important role.

Reference：
Article; Nakhaei, Ahmad; Ramezani, Shirin; Shams-Najafi, Sayyed Jalal; Farsinejad, Sadaf; Letters in Organic Chemistry; vol. 15; 9; (2018); p. 739 – 746;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5308-25-8,5308-25-8, 1-Ethylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A solution of compound 2 (0.55 mmol), 1-substituted piperazine (0.83 mmol) and pyridine (0.8 mmol) in 10 mL THF (tetrahydrofuran) was stirred at room temperature overnight. When the reaction was completed, the solvent was evaporated under reduced pressure. The residues were dissolved in ethyl acetate and washed with water and saturated sodium chloride solution. After drying over anhydrous Na2SO4, the solvent was removed under reduced pressure to get crude product. The pure products were obtained by recrystallizing from ethanol.

The synthetic route of 5308-25-8 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Wu, Zhilin; Ding, Na; Tang, Yuting; Ye, Jiao; Peng, Junmei; Hu, Aixi; Research on Chemical Intermediates; vol. 43; 8; (2017); p. 4833 – 4850;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5308-25-8, 1-Ethylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5308-25-8, A mixture of 4-amino-2-trifluoromethyl -benzoic acid (15 g, 73.1 mmol), HOBT (14.56 g, 95 mmol), EDC (16.82 g, 88 mmol), Et3N (20.38 mL, 146 mmol), 1-ethyl-piperazine (8.35 g, 73.1 mmol) in DCM (200 mL) was stirred at 25 C for 2 h. To the mixture was added DCM (200 mL) and then washed with H20, 2 M NaOH (2 x 150 mL) and brine. The organic layer was dried over NaaSOzi, filtered, and concentrated to give a off white solid of (4-amino-2-trifluoromethyl-phenyl)- (4-ethyl-piperazin-l-yl)-methanone (20 g, 65.2 mmol, 89.0% yield): NMR (400 MHz, CDC13) delta: 7.07 (d, J = 8.0 Hz, 1H), 6.92 (d, J = 2.4 Hz, 1H), 6.79 (dd, J = 2.0, 8.0 Hz, 1H), 3.99 (s, 2H), 3.84-3.76 (m, 2H), 3.25-3.23 (m, 2H), 2.50-2.39 (m, 4H), 2.33-2.31 (m, 2H), 1.08 (t, J = 7.2 Hz, 3H); ES-LCMS m/z 302 (M+H).

5308-25-8 1-Ethylpiperazine 79196, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; EIDAM, Hilary Schenck; DEMARTINO, Michael P.; GONG, Zhen; GUAN, Amy Huiping; RAHA, Kaushik; WU, Chengde; YANG, Haiying; YU, Haiyu; ZHANG, Zhiliu; CHEUNG, Mui; WO2014/141187; (2014); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5308-25-8,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5308-25-8,1-Ethylpiperazine,as a common compound, the synthetic route is as follows.

To a solution of compound 88 (2 g, 9.8 mmol, 1 eq) in DMSO (10 mL) was added K2CO3 (2.7 g, 19.7 mmol, 2 eq), 1-ethylpiperazine (compound 89, 1.7 g, 14.7 mmol, 1.5 eq) and TBAI (36 mg, 0.098 mmol, 0.01 eq). The reaction mixture was stirred at 120 C for 2 h. After cooling down to rt, the mixture was diluted with water (30 mL), thus formed solid was filtered, rinsed with water (5 mL x 3), and dried to afford the desired product (1.5 g, 65%) as a yellow solid which was used to the next step directly. NMR (300 MHz, CDC ): delta 8.19- 8.14 (m, 2 H), 7.23-7.19 (m, 1 H), 3.53-3.45 (m, 4 H), 2.79-2.65 (m, 4 H), 2.57-2.50 (m, 2 H), 1.19 (t, J= 7.2 Hz, 3 H).

5308-25-8 1-Ethylpiperazine 79196, apiperazines compound, is more and more widely used in various fields.

Reference：
Patent; BEIJING XUANYI PHARMASCIENCES CO., LTD.; SONG, Yuntao; CHEN, Xiaoqi; (188 pag.)WO2019/35008; (2019); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5308-25-8,1-Ethylpiperazine,as a common compound, the synthetic route is as follows.,5308-25-8

General procedure: A solution of compound 2 (0.55 mmol), 1-substituted piperazine (0.83 mmol) and pyridine (0.8 mmol) in 10 mL THF (tetrahydrofuran) was stirred at room temperature overnight. When the reaction was completed, the solvent was evaporated under reduced pressure. The residues were dissolved in ethyl acetate and washed with water and saturated sodium chloride solution. After drying over anhydrous Na2SO4, the solvent was removed under reduced pressure to get crude product. The pure products were obtained by recrystallizing from ethanol.

The synthetic route of 5308-25-8 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Wu, Zhilin; Ding, Na; Tang, Yuting; Ye, Jiao; Peng, Junmei; Hu, Aixi; Research on Chemical Intermediates; vol. 43; 8; (2017); p. 4833 – 4850;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5308-25-8,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5308-25-8,1-Ethylpiperazine,as a common compound, the synthetic route is as follows.

A mixture of 2 g (13 mmol) 2-chloro-5-nitro-pyridine and 0.76 g (6 mmol) N,N-diisopropylethylamine in 21 ml water and 4 ml DMF was heated to 80 C. During 2 min 1.73 g (15 mmol) N-ethylpiperazine was added and the mixture was kept for an additional hour at 80 C. The yellow precipitate was filtered off and washed three times with 4 ml water and dried for 16 h under vacuum to yield 2.48 g (83%) of the title compound as yellow crystals. (m/e): 237.1 (MH+; 100%).

As the paragraph descriping shows that 5308-25-8 is playing an increasingly important role.

Reference：
Patent; Nettekoven, Matthias Heinrich; Roche, Olivier; Rodriguez-Sarmiento, Rosa Maria; US2006/122187; (2006); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5308-25-8,1-Ethylpiperazine,as a common compound, the synthetic route is as follows.,5308-25-8

General procedure: A solution of compound 2 (0.55 mmol), 1-substituted piperazine (0.83 mmol) and pyridine (0.8 mmol) in 10 mL THF (tetrahydrofuran) was stirred at room temperature overnight. When the reaction was completed, the solvent was evaporated under reduced pressure. The residues were dissolved in ethyl acetate and washed with water and saturated sodium chloride solution. After drying over anhydrous Na2SO4, the solvent was removed under reduced pressure to get crude product. The pure products were obtained by recrystallizing from ethanol.

The synthetic route of 5308-25-8 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Wu, Zhilin; Ding, Na; Tang, Yuting; Ye, Jiao; Peng, Junmei; Hu, Aixi; Research on Chemical Intermediates; vol. 43; 8; (2017); p. 4833 – 4850;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5308-25-8,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5308-25-8,1-Ethylpiperazine,as a common compound, the synthetic route is as follows.

A mixture of 2 g (13 mmol) 2-chloro-5-nitro-pyridine and 0.76 g (6 mmol) N,N-diisopropylethylamine in 21 ml water and 4 ml DMF was heated to 80 C. During 2 min 1.73 g (15 mmol) N-ethylpiperazine was added and the mixture was kept for an additional hour at 80 C. The yellow precipitate was filtered off and washed three times with 4 ml water and dried for 16 h under vacuum to yield 2.48 g (83%) of the title compound as yellow crystals. (m/e): 237.1 (MH+; 100%).

As the paragraph descriping shows that 5308-25-8 is playing an increasingly important role.

Reference：
Patent; Nettekoven, Matthias Heinrich; Roche, Olivier; Rodriguez-Sarmiento, Rosa Maria; US2006/122187; (2006); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5308-25-8,1-Ethylpiperazine,as a common compound, the synthetic route is as follows.

5308-25-8, General procedure: Substituted amine (1.2 equiv) was added to a mixture of 4-fluoronitrobenzene (1 equiv) and K2CO3 (2.0 equiv) in DMF (7mL/g). The reaction mixture was stirred at 40C and followed by TLC. After completion of the reaction, the mixture was poured into stirring ice-water. The resulting precipitate was filtered and dried to obtain compounds 11 as a yellow solid.

As the paragraph descriping shows that 5308-25-8 is playing an increasingly important role.

Reference：
Article; Hou, Yunlei; Zhu, Liangyu; Li, Zhiwei; Shen, Qi; Xu, Qiaoling; Li, Wei; Liu, Yajing; Gong, Ping; European Journal of Medicinal Chemistry; vol. 163; (2019); p. 690 – 709;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

5308-25-8, 1-Ethylpiperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a solution of substituted piperazines (0.9819mmol) in dry DMF (4mL), triethylamine (0.27mL, 1.9638mmol) and potassium iodide (16.29mg, 0.0981mmol) were added at RT under N2 atmosphere. Compound 2 (0.4g, 0.9819mmol) was added to the above reaction mixture and resultant mixture was heated at 125C. After the reaction was complete, as indicated by TLC, DMF was evaporated in vacuo. The obtained residue was diluted with 20mL of water. The compound was extracted with CH2Cl2 (3×5mL). The organic layers were collected, washed with saturated brine solution, dried over anhydrous MgSO4 and concentrated in vacuo. The resultant crude was purified by column chromatography [CH2Cl2/MeOH (1-10%)] to get the title compounds.

5308-25-8, As the paragraph descriping shows that 5308-25-8 is playing an increasingly important role.

Reference：
Article; Suresh, Narva; Nagesh, Hunsur Nagendra; Renuka, Janupally; Rajput, Vikrant; Sharma, Rashmi; Khan, Inshad Ali; Kondapalli Venkata Gowri, Chandra Sekhar; European Journal of Medicinal Chemistry; vol. 71; (2014); p. 324 – 332;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics