New learning discoveries about 59878-57-8

59878-57-8 1-(Cyclopropylcarbonyl)piperazine 2064235, apiperazines compound, is more and more widely used in various fields.

59878-57-8,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.59878-57-8,1-(Cyclopropylcarbonyl)piperazine,as a common compound, the synthetic route is as follows.

General procedure: Compound 6 (1.0 equiv) with catalytic equivalent KI was dissolved in freshly distilled DMF in an oven-dried round bottom flask. Different aliphatic amines (3.0 equiv) was added dropwise. The reaction mixture was stirred at room temperature for about 4h. After the reaction monitored by TLC was over, water was added to the reaction mixture under stirring, and the suspended mixture was filtered. The crude residue was purified by column chromatography on silica gel to obtain the final products.

59878-57-8 1-(Cyclopropylcarbonyl)piperazine 2064235, apiperazines compound, is more and more widely used in various fields.

Reference£º
Article; Chen, Lijuan; Chen, Yong; Deng, Dexin; Liu, Kongjun; Pei, Heying; Tang, Minghai; Xue, Linlin; Yang, Tao; Yang, Zhuang; Ye, Haoyu; Zheng, Shoujun; European Journal of Medicinal Chemistry; vol. 197; (2020);,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

New learning discoveries about 59878-57-8

59878-57-8 1-(Cyclopropylcarbonyl)piperazine 2064235, apiperazines compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.59878-57-8,1-(Cyclopropylcarbonyl)piperazine,as a common compound, the synthetic route is as follows.

59878-57-8, (e) Library Synthesis (10a-m)To a solution of 2-fluoro-5-(4-oxo-3,4,5,6,7,8-hexahydro-phthalazin-1-ylmethyl)-benzoic acid (22 mg, 0.07 mmol), in DMA (1 ml) was added HBTU (53 mg, 0.140 mmol), triethylamine (20 muL, 0.140 mol) and amine (0.140 mmol). The crude reaction mixture was stirred for 18 hours at room temperature and then submitted for preparative HPLC purification.

59878-57-8 1-(Cyclopropylcarbonyl)piperazine 2064235, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; Javaid, Muhammad Hashim; Menear, Keith Allan; Martin, Niall Morrison Barr; Smith, Graeme Cameron Murray; Rudge, David Alan; Roberts, Craig Anthony; US2009/23727; (2009); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Analyzing the synthesis route of 59878-57-8

As the paragraph descriping shows that 59878-57-8 is playing an increasingly important role.

59878-57-8,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.59878-57-8,1-(Cyclopropylcarbonyl)piperazine,as a common compound, the synthetic route is as follows.

Lithium aluminium hydride (770 mg, 20.3 mmol) was suspended in tetrahydrofuran (150 mL), 1-(cyclopropylcarbonyl)piperazine (1.56 g, 10.1 mmol) was gradually added thereto, and the reaction mixture was heated under reflux for 30 minutes. The reaction mixture was cooled to room temperature, and 0.8 mL of water, 0.8 mL of a 15% aqueous solution of sodium hydroxide and 2.3 mL of water were sequentially gradually added thereto. The precipitated insoluble matter was removed by filtration through Celite, and the filtrate was evaporated to give the title compound (1.40g) as a colorless oil. The product was used for the synthesis of (8E,12E,14E)-7-((4-cyclopropylmethylpiperazin-1-yl)carbonyl)oxy-3,6,16,21-tetrahydroxy-6,10,12,16,20-pentamethyl-18,19-epoxytricosa-8,12,14-trien-11-olide (the compound of Example 27) without further purification.1H-NMR Spectrum (CDCl3,400MHz) delta(ppm): 0.09-0.15(2H,m), 0.48-0.56(2H,m),0.82-0.93(1H,m),2.25(2H,d,J=7.2Hz) 2.48-2.65(4H,m),2.90-2.99(4H,m).

As the paragraph descriping shows that 59878-57-8 is playing an increasingly important role.

Reference£º
Patent; MERCIAN CORPORATION; Eisai Co., Ltd.; EP1508570; (2005); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Some tips on 59878-57-8

The synthetic route of 59878-57-8 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.59878-57-8,1-(Cyclopropylcarbonyl)piperazine,as a common compound, the synthetic route is as follows.

To a round bottom flask was added, 2-fluorobenzoic acid (1.00 g, 7.14 mmol), DCM (40 mL), diisopropylethylamine (1.86 mL, 10.7 mmol) and HBTU (4.06 g, 10.7 mmol). The reaction mixture was then stirred for 30 minutes at room temperature before adding cyclopropylpiperazine-l-ylmethanone (1.52 mL, 10.7 mmol). The reaction was stirred overnight before the excess solvent with removed in vacuo and the cmde material purified via flash column chromatography (EtOAc:MeOH 10:1) affording (4- (Cyclopropanecarbonyl)piperazin-l-yl)(2-(4,4,5,5-tetramethyl-l,3,2-dioxaborolan-2- yl)phenyl)methanone as a white solid (1.32 g, 4.78 mmol 67%) in a mixture of rotamers (2:1). In each case the shift relating to the minor rotamer has been donated with an asterisk.* NMR (400 MHz, CDCh) d = 7.40 – 7.29 (m, 2H + 2H*), 7.16 (td, / = 7.5, 1.1 Hz, 1H + 1H*), 7.04 (ddd, J = 9.4, 8.3, 1.1 Hz, 1H + 1H*), 3.88 – 3.46 (m, 6H + 6H*), 3.38 – 3.20 (m, 2H + 2H*), 1.76 – 1.58 (m, 1H + 1H*), 0.98 – 0.88 (m, 2H + 2H*), 0.83 – 0.62 (m, 2H + 2H*); 13C NMR (100 MHz, CDCb) d = 172.3 (1C + 1C*), 165.4 (1C + 1C*), 158.0 (d, 7 = 247.7 Hz, 1C + 1C*), 131.7 (d, 7 = 8.0 Hz, 1C + 1C*), 129.1 (1C + 1C*), 124.9 (d, 7 = 3.5 Hz, 1C + 1C*), 123.5 (d, 7 = 17.4, 1C + 1C*), 115.8 (d, 7 = 21.3, 1C + 1C*), 47.0 (1C*), 46.7 (1C), 45.6 (1C*), 45.1 (1C), 42.2 (2C), 41.9 (1C*), 41.7 (1C*), 11.0 (1C + 1C*), 7.64 (2C + 2C*); OH^F NMR (376 MHz, CDCb) d = – 115.0 (s, IF*), – 115.1 (s, IF); IR (v, cm x): 1630, 1460, 1219, 1004, 727; HRMS (ESI) for Ci5Hi819FN202 [M+H]+ requires 277.1282 found 277.1285; Mp: 65 – 67C., 59878-57-8

The synthetic route of 59878-57-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; OXFORD UNIVERSITY INNOVATION LIMITED; GOUVERNEUR, Veronique; CORNELISSEN, Bart; WILSON, Thomas Charles; (152 pag.)WO2019/186135; (2019); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Some tips on 59878-57-8

The synthetic route of 59878-57-8 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.59878-57-8,1-(Cyclopropylcarbonyl)piperazine,as a common compound, the synthetic route is as follows.

To a round bottom flask was added, 2-fluorobenzoic acid (1.00 g, 7.14 mmol), DCM (40 mL), diisopropylethylamine (1.86 mL, 10.7 mmol) and HBTU (4.06 g, 10.7 mmol). The reaction mixture was then stirred for 30 minutes at room temperature before adding cyclopropylpiperazine-l-ylmethanone (1.52 mL, 10.7 mmol). The reaction was stirred overnight before the excess solvent with removed in vacuo and the cmde material purified via flash column chromatography (EtOAc:MeOH 10:1) affording (4- (Cyclopropanecarbonyl)piperazin-l-yl)(2-(4,4,5,5-tetramethyl-l,3,2-dioxaborolan-2- yl)phenyl)methanone as a white solid (1.32 g, 4.78 mmol 67%) in a mixture of rotamers (2:1). In each case the shift relating to the minor rotamer has been donated with an asterisk.* NMR (400 MHz, CDCh) d = 7.40 – 7.29 (m, 2H + 2H*), 7.16 (td, / = 7.5, 1.1 Hz, 1H + 1H*), 7.04 (ddd, J = 9.4, 8.3, 1.1 Hz, 1H + 1H*), 3.88 – 3.46 (m, 6H + 6H*), 3.38 – 3.20 (m, 2H + 2H*), 1.76 – 1.58 (m, 1H + 1H*), 0.98 – 0.88 (m, 2H + 2H*), 0.83 – 0.62 (m, 2H + 2H*); 13C NMR (100 MHz, CDCb) d = 172.3 (1C + 1C*), 165.4 (1C + 1C*), 158.0 (d, 7 = 247.7 Hz, 1C + 1C*), 131.7 (d, 7 = 8.0 Hz, 1C + 1C*), 129.1 (1C + 1C*), 124.9 (d, 7 = 3.5 Hz, 1C + 1C*), 123.5 (d, 7 = 17.4, 1C + 1C*), 115.8 (d, 7 = 21.3, 1C + 1C*), 47.0 (1C*), 46.7 (1C), 45.6 (1C*), 45.1 (1C), 42.2 (2C), 41.9 (1C*), 41.7 (1C*), 11.0 (1C + 1C*), 7.64 (2C + 2C*); OH^F NMR (376 MHz, CDCb) d = – 115.0 (s, IF*), – 115.1 (s, IF); IR (v, cm x): 1630, 1460, 1219, 1004, 727; HRMS (ESI) for Ci5Hi819FN202 [M+H]+ requires 277.1282 found 277.1285; Mp: 65 – 67C., 59878-57-8

The synthetic route of 59878-57-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; OXFORD UNIVERSITY INNOVATION LIMITED; GOUVERNEUR, Veronique; CORNELISSEN, Bart; WILSON, Thomas Charles; (152 pag.)WO2019/186135; (2019); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Some tips on 59878-57-8

The synthetic route of 59878-57-8 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.59878-57-8,1-(Cyclopropylcarbonyl)piperazine,as a common compound, the synthetic route is as follows.,59878-57-8

To a solution of 1 i (28 mg, 0.089 mmol) in acetonitrile (2 mL) were added DIPEA (48 muIota_, 0.267 mmol), 1j (15 muIota_, 0.107 mmol) and HATU (41 mg, 0.107 mmol). The resulting mixture was stirred at room temperature for 2 h and purified by reversed phase prep HPLC to give title compound 1 as white solid (36 mg, 90% yield). The mass of the compound was obtained by Shimadzu LCMS-2020, MS(ESI) : m/z = 451 [M+H]

The synthetic route of 59878-57-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ETERNITY BIOSCIENCE INC.; LIU, Dong; ZHANG, Minsheng; HE, Kan; ZHANG, Lianshan; WO2012/125521; (2012); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Brief introduction of 59878-57-8

As the paragraph descriping shows that 59878-57-8 is playing an increasingly important role.

59878-57-8, 1-(Cyclopropylcarbonyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

59878-57-8, General procedure: Piperazine derivatives 1-3 are known.10 Piperazine derivatives 4-14 were synthesized from the commercially available appropriate monoalkylated piperazines (1.44 mmol) and 2-nitro-1H-imidazolyl-propylbromide or 3-nitro-1H-1,2,4-triazolylpropylbromide (1.485 mmol)30 in the presence of potassium carbonate (13.24 mmol) in dry acetonitrile (25 mL) as described before.10 The reaction mixture was stirred under a nitrogen atmosphere at room temperature for 48 h, then filtered to remove the inorganic salts. The organic filtrate was evaporated and the residue extracted from water-chloroform. The organic layer was separated and dried over anhydrous Na2SO4. After filtration, the solvent was evaporated and the residue purified by preparative TLC on alumina plates with ethyl acetate:petroleum ether mixture. The desired product was dissolved in ethyl acetate and converted to its HCl salt by treating with HCl gas in dry ether (1 M solution)

As the paragraph descriping shows that 59878-57-8 is playing an increasingly important role.

Reference£º
Article; Papadopoulou, Maria V.; Bloomer, William D.; Rosenzweig, Howard S.; Kaiser, Marcel; Chatelain, Eric; Ioset, Jean-Robert; Bioorganic and Medicinal Chemistry; vol. 21; 21; (2013); p. 6600 – 6607;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Downstream synthetic route of 59878-57-8

59878-57-8 1-(Cyclopropylcarbonyl)piperazine 2064235, apiperazines compound, is more and more widely used in various fields.

59878-57-8, 1-(Cyclopropylcarbonyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

59878-57-8, Examples 35-92; General Procedure for Examples 35-92; A solution of 3-{4-[(E)-3-(3,4-dichloro-phenyl)-acryloyl]-7-oxo-[1,4]diazepan-1-yl}-propionaldehyde (intermediate 2) (0.037 g, 0.1 mmol) in DCE (0.5 ml) was added to the appropriate amine (0.1 mmol) followed by a freshly prepared solution of pyridine-borane complex (25 ul, 8M in pyridine, 0.2 mmol) and acetic acid (25 ul) in EtOH (0.5 ml). The reaction was then shaken overnight, concentrated and the residue purified by preparative HPLC.

59878-57-8 1-(Cyclopropylcarbonyl)piperazine 2064235, apiperazines compound, is more and more widely used in various fields.

Reference£º
Patent; Aebi, Johannes; Green, Luke; Mattei, Patrizio; Ricklin, Fabienne; Roche, Olivier; Zahm, Peter; US2007/249589; (2007); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Brief introduction of 59878-57-8

As the paragraph descriping shows that 59878-57-8 is playing an increasingly important role.

59878-57-8, 1-(Cyclopropylcarbonyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

59878-57-8, General procedure: Compound 6 (1.0 equiv) with catalytic equivalent KI was dissolved in freshly distilled DMF in an oven-dried round bottom flask. Different aliphatic amines (3.0 equiv) was added dropwise. The reaction mixture was stirred at room temperature for about 4h. After the reaction monitored by TLC was over, water was added to the reaction mixture under stirring, and the suspended mixture was filtered. The crude residue was purified by column chromatography on silica gel to obtain the final products.

As the paragraph descriping shows that 59878-57-8 is playing an increasingly important role.

Reference£º
Article; Chen, Lijuan; Chen, Yong; Deng, Dexin; Liu, Kongjun; Pei, Heying; Tang, Minghai; Xue, Linlin; Yang, Tao; Yang, Zhuang; Ye, Haoyu; Zheng, Shoujun; European Journal of Medicinal Chemistry; vol. 197; (2020);,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics

Brief introduction of 59878-57-8

As the paragraph descriping shows that 59878-57-8 is playing an increasingly important role.

59878-57-8,59878-57-8, 1-(Cyclopropylcarbonyl)piperazine is a piperazines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

3-(4-oxo-3,4-dihydro-phthalazin- 1 -yl-oxyl)benzoic acid (54 mg, 0.3 mmol) was dissolved in N,N-dimethylformamide, and then 1-(3-dimethylaminopropyl)-3-ethylcar- bodiimide hydrochloride (EDCI) (220 mg, 1.2 mmol), triethylamine (150 pL, 1.2 mmol) and 1 -hydroxy-7-azaben- zotriazole (HOAt) (165 mg, 1.2 mmol) were added successively. The mixture was stirred at room temperature for half an hour, and then N-(cyclopropanecarbonyl) piperazine was added and reacted at room temperature overnight, and then the reaction was quenched with water, extracted with ethyl acetate, and washed with water for three times. The organic phases were combined and washed with saturated saline, dried with anhydrous sodium sulfate, and concentrated for colunm chromatography isolation (dichloromethane:methanol=20: 1) to give Compound 7. A white solid was obtained. ?H NMR (600 MHz, DMSO-d5): oe 11.98 (s, 1H), 8.27 (d, 1H, J=7.38 Hz), 8.10 (d, 1H, J=7.74 Hz), 7.99-8.01 (m, 1H), 7.94-7.96 (m, 1H), 7.52 (t, 1H, J=7.86 Hz), 7.39-7.38 (m, 2H), 7.28 (d, 1H, J=7.62 Hz), 3.33-3.81 (m, 8H), 1.96 (brs, 1H), 0.69-0.74 (m, 4H); ESI-MSm/z: calculated for4l8.16. found 417.89 [M-H].

As the paragraph descriping shows that 59878-57-8 is playing an increasingly important role.

Reference£º
Patent; CHENGDU DI’AO PHARMACEUTICAL GROUP CO., LTD.; Ji, Jianxin; Guo, Na; Xue, Ting; Kang, Bingqiang; Ye, Xinfa; Chen, Xin; Zhang, Tao; US2015/51211; (2015); A1;,
Piperazine – Wikipedia
Piperazines – an overview | ScienceDirect Topics